Eesti
DAP XLR Cable FLN016 Neutrik® 6 m
XLR Cable FLN016 Neutrik® 6 m balanced XLR lead with Neutrik connectors and shielding for clean audio on longer stage and studio runs.
31,90 €
Mon–Fri, 11 a.m.–4 p.m.
Related products
XLR Cable FLN016 Neutrik® for longer, clean balanced runs
The XLR Cable FLN016 Neutrik® is a 6 m balanced XLR microphone/line cable designed for reliable signal transfer over longer distances on stage or in rehearsal rooms. It features Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts for consistent connectivity, and combines OFC copper conductors with spiral shielding to help reduce interference. The 6 m length is ideal when performers need freedom of movement or when your mixer and stagebox are placed further away.
Key features of XLR Cable FLN016 Neutrik®
- ✓ 6 m balanced XLR cable for extended reach
- ✓ Neutrik NC3XXX-BAG connectors for dependable mating
- ✓ Silver-plated contacts for stable, low-impedance signal
- ✓ 2 × 0.22 mm² OFC conductors for solid audio transfer
- ✓ OFC spiral shielding to reduce hum and interference
- ✓ Hook-and-loop fastener for tidy coiling
Detailed features and ideal use
With two 0.22 mm² conductors (AWG 24) and a spiral shield, this cable supports balanced connections that help maintain clarity in environments with power cables, LED drivers or wireless systems nearby. The 5.9 mm outer diameter keeps handling manageable even at 6 m, making it suitable for regular gigging. Use the XLR 3-pin male to XLR 3-pin female wiring for microphones, DI outputs, stagebox feeds and powered speakers where extra length improves placement flexibility.
Why choose this cable over basic XLR leads
Longer runs can expose weaknesses in cheap connectors and inconsistent contact plating. The XLR Cable FLN016 Neutrik® prioritises connection integrity with genuine Neutrik NC3XXX-BAG connectors and silver-plated contacts, helping reduce dropouts and crackles caused by poor mating surfaces. Combined with OFC conductors and shielding, it offers predictable performance for mobile rigs and installed systems. If you want a longer XLR lead you can trust repeatedly, this is the safer choice than generic alternatives.
What’s in the Box
- ✓ XLR Cable FLN016 Neutrik® (6 m), XLR 3P male to XLR 3P female
- ✓ Hook-and-loop cable fastener
- ✓ User manual
Quick start guide
Connect the XLR female end to your microphone or balanced output source. Connect the XLR male end to the XLR input on your mixer, interface, stagebox or powered speaker. Route the cable along the edge of the stage or wall where possible, and avoid running it parallel to mains cables for long distances. Coil any extra length neatly and secure it with the included fastener. Lock both latches, then verify signal during soundcheck.
Frequently Asked Questions
Will this work with microphones, line-level gear and powered speakers with XLR?
Yes, it is an XLR 3-pin male to XLR 3-pin female cable suitable for balanced inputs and outputs on microphones, mixers, interfaces and powered speakers.
Does it include original Neutrik connectors?
Yes, it is fitted with Neutrik NC3XXX-BAG XLR connectors with silver-plated contacts for stable, reliable connections.
Is this a balanced XLR cable and does it help reduce hum and noise?
Yes, it uses two conductors plus spiral shielding for balanced microphone or line connections, helping minimise hum and interference in typical pro-audio setups.
Is the cable flexible enough for gigging?
Yes, its compact diameter is designed for practical handling, routing and regular live use.
| General | |
| Product type | Microphone/Line cable |
| Cable | |
| Cable construction | Balanced |
| Signal conductors | 2 |
| Conductor cross-section | 2 x 0.22 mm² |
| Shielding | Spiral shield |
| Conductor material | OFC copper |
| Jacket material | PVC |
| Colour | Black |
| Outer cable diameter | 0.59 cm |
| IP rating | IP40 |
| Connectivity | |
| Connector type | XLR |
| Connector 1 | XLR 3P Male |
| Connector 2 | XLR 3P Female |
| Connector brand | Neutrik |
| Number of pins | 3 |
| Connector 1 (Male) | |
| Connector model | NC3MXX-BAG |
| Connection type | XLR |
| Gender | Male |
| Capacitance between contacts | ≤ 4 pF |
| Contact resistance | ≤ 3 mΩ |
| Dielectric strength | 1.5 kVdc |
| Insulation resistance | > 10 GΩ (initial) |
| Rated current per contact | 16 A |
| Rated voltage | < 50 V |
| Cable O.D. range | 0.35 cm – 0.80 cm |
| Insertion force | ≤ 20 N |
| Withdrawal force | ≤ 20 N |
| Lifetime | > 1000 mating cycles |
| Max. wire size | 2.5 mm² |
| Max. wire size (AWG) | 14 AWG |
| Wiring | Solder contacts |
| Locking device | Latch lock |
| Boot material | Polyurethane |
| Contact plating | 2 µm Ag |
| Contacts material | Brass (CuZn39Pb3) |
| Insert material | Polyamide (PA66) |
| Shell material | Zinc diecast (ZnAl4Cu1) |
| Shell coating | Black KTL |
| Strain relief material | Polyacetal (POM) |
| Temperature range | -30 °C to +80 °C |
| Connector 2 (Female) | |
| Connector model | NC3FXX-BAG |
| Connection type | XLR |
| Gender | Female |
| Capacitance between contacts | ≤ 4 pF |
| Contact resistance | ≤ 3 mΩ |
| Dielectric strength | 1.5 kVdc |
| Insulation resistance | > 10 GΩ (initial) |
| Rated current per contact | 16 A |
| Rated voltage | < 50 V |
| Cable O.D. range | 0.35 cm – 0.80 cm |
| Insertion force | ≤ 20 N |
| Withdrawal force | ≤ 20 N |
| Lifetime | > 1000 mating cycles |
| Max. wire size | 2.5 mm² |
| Max. wire size (AWG) | 14 AWG |
| Wiring | Solder contacts |
| Locking device | Latch lock |
| Boot material | Polyurethane |
| Contact plating | 2 µm Ag |
| Contacts material | Bronze (CuSn8) |
| Insert material | Polyamide (PA66) |
| Locking element | Zinc diecast (ZnAl4Cu1) / Ck 67 (spring) |
| Locking element plating | Nickel |
| Shell material | Zinc diecast (ZnAl4Cu1) |
| Shell coating | Black KTL |
| Strain relief material | Polyacetal (POM) |
| Temperature range | -30 °C to +80 °C |
| Physical | |
| Product dimensions | Length: 600 cm |
| Product weight | 0.32 kg |